Replacement rubber end connector for the Air Boy brake bleeder. This connector connects to the clear plastic hose using a nipple (124143256).

This rubber end connector can be purchased individually, or as part of the 124143155 brake bleeder refurbishment kit.

• For 124143100 Air Boy brake bleeder

Keep your Air Boy brake bleeder in great working condition! All consumable parts are easily replaceable with this renewal kit.

• O-ring
• Connector pin
• Plastic spring
• Connector hose
• Nipple
• End connector

An oil filling funnel for Toyota vehicles. The funnel is designed to connect directly to oil filler necks, avoiding oil spills. Lower transparent chamber shows oil flows down to the engine.

Engine oil bottles can be put up side down - allowing a hands-free / one-person operation.

European made quality!

Two variants - one for light solvents / other for general use.

• Trigger with filter
• Matt top cover
• ML & OZ scale
• Stable base

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 15mm diameter suits small pipes.

• Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
• Actively locks onto the blow gun pipe.
• Non-marring rubber surface protects against scratching delicate surfaces.

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar. This high pressure bleeder is compatible with electro-hydraulic braking systems that operate at a higher pressure than conventional systems.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.
• Adjustable pressure from 0 - 3 Bar.
• Powered by the vehicle's 12V battery
• Compatible with DOT 3 | DOT 4 | DOT 5.1 brake fluids

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

A pack of high quality Roloc style CDR discs. These discs are designed for use with Roloc style sanders. These discs are made from high quality felt.

• 2" diameter
• Felt material
• 10 pack

This test performs leak down tests which can be more accurate than normal compression tests.

Leak down tests can be used to detect various engine faults including leakage past rings, head gaskets, intake / exhaust valves etc.

• Requires air source of 70-160PSI, as the unit will pressurise system to 60PSI.
• Spark plus thread hoses: 10, 12, 14mm | regulator & o-rings

This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• CAT III 600V rating