A specialised cleaning gun for helping to remove bacteria from the air conditioning system. The gun injects cleaning fluid directly into the air conditioner evaporator.
The cleaning detergent leaves a protective layer in the air conditioning system that keeps it clean and at the same time secures a clean odour in the car. As quality and functionality always matters to Air Boy, our AC Cleaner is both easy to use and produced in impact-resistant quality materials that makes the tool very long lasting.
- Remove bacteria / odours
- Cleaning fluid available separately (SKU# AC-1L)
| SKU | 124142175 |
| Barcode # | 9321280319004 |
| Brand | Air Boy |
| Product weight | 5.2000kg |
| Shipping weight | 13.010000kg |
12 Months
Others also bought
Torx Plus Impact Socket | T50 | 78mm
A high quality single piece / impact grade Torx Plus socket (not to be confused with a standard Torx T50!). Used primarily for Subaru / Nissan dual mass flywheel.
- T50IP Torx Plus
- 78mm overall length
- 1/2" Sq Drv
- Chrome Moly construction
Thin Wall Wheel Nut Socket Set Reinforced | 4 Pce
NEW DESIGN! Patented ring prevents breakage. Lasts up to 4 longer than traditional design. Plastic sleeve protects surfaces.
- 17 | 19 | 21 | 22mm diameter
- Thin wall construction
- Chrome Moly impact grade
- 1/2" Sq Drv
ETBBL Promo
Pulsating Cooling System Flushing Tool
Combines air / water, with pulsating effect, for more effective coolant system cleaning.
- Clean radiators / engine blocks / heater cores
- Uses shop air / water hose
More from this category
A/C & Fuel Line Disconnect Set
For press type disconnection clips on Chrysler, Ford, Holden etc.
- Fuel line: 5/16” & 3/8”
- Air con: 3/8” | 1/2" | 5/8 ” | 3/4"
A/C Clutch Hub Puller Kit
This kit contains a wide range of air conditioning clutch hub pullers / installers for Ford, Holden, Chrysler and a range of other vehicles.
Included in this kit are forcing screws, removing flange, and adaptor assembly to install / remove most clutch hubs.
- Applications: Holden-Harrison DA-6, HR-6 and V5, A-6 and early R4 | Nippon Denso Ford / Chrysler A590, C171 & FS-6 | New Style, Sanden, York / Tecumesh HR980 | Zetex / Mitsubishi CH Series
A/C Compressor Seal & Bearing Service Kit
A comprehensive kit for replacing air conditioning seals, clutches and clutch bearings. This kit suits Diesek Kiki (Zexel) | Hitachi | Mitsubishi | Nippondenso | Seiko-Seiki | Sanden.
Ford / Mazda A/C Compressor Belt Installer
Essential tool for A/C belt installation on Mazda 3 / Mazda 6 / Ford Focus.
Ford A/C Compressor Stretch Belt Tool
Specialised tool for removing / installing the inner belt (on engines with two belts).
- Suits Ford Fiesta 1.6L (11-16)
- Equivalent to Gates 91032
Mercedes A/C Low Side Coupler Removal
A specialised tool for removing the A/C low side coupler on Mercedes vehicles.
- Applications: W204 | W211 | W219 | W221