Quiet, efficient, regulated distribution of compressed air for drying, cleaning, cooling etc.

The blow gun is assembled with a flat nozzle giving a high blowing force, but with a low noise level / unblockable airflow. The airflow is spread out, which makes the gun impossible to block.

• 8 bar Max Working Pressure
• 580 l/min air flow (at 8 Bar)
• 81.5 dBA noise level

Thin wall wheel nut socket with special 17mm profile for Mercedes vehicles. Impact grade with nylon sleeve to protect against scratching alloy wheels.

Applications include Mercedes C Class (W204) and E Class (W211 | W212 | W207)

NEW DESIGN! The patented ring at the top of the sockets helps prevent breakage. As such, these sockets last up to 4 times longer than traditional thin wall wheel nut sockets. A plastic sleeve helps protects surfaces.

• 1/2" Sq Drv
• Size: 17mm (special profile)
• Impact grade
• Thin wall (with protective sleeve)

The Air Boy 90 degree nozzle is now available in a new pushfit version. The function of the nozzle remains unchanged, but the pushfit connector makes it possible to remove the nozzle from the tip. The 90 degree nozzle is perfecct for cleaning out cylindrical filters etc.

The pushfit connector actively locks onto the blow gun pipe, and will not come off until the collar is lifted. Suits all 8mm dia Air Boy blow guns.

• Ideal for blowing out filters
• Works with all Air Boy 8mm dia blow guns
• Made in Denmark

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 25mm dia is suitable for flushing hoses up to 7/8".

• Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
• Actively locks onto the blow gun pipe.
• Non-marring rubber surface protects against scratching delicate surfaces.

90 degree nozzles attach to all Air Boy blow guns. 90 degree airflow is ideal for cleaning filters and other similar applications.

• Simply screws on (but cannot be removed once attached)

A handy kit that adds functionality to Air Boy blow guns. Push fit design locks onto pipe.

Easily removed by lifting collar.

• Rubber tip for blowing out pipes, silent / unlockable, venturi for extra air flow, and 90 degrees for blowing out filters.
• Safety shield to protect against blow back.
• Suitable for use with all standard Air Boy blow guns (with 8mm dia pipe).

The Air Boy TURBO nozzle makes any Air Boy blow gun (with 8mm pipe) unblockable and increases airflow by 100%. The bypass nozzle makes it possible for the blow gun to absorb air through the sides, which provides for extra high airflow. The air also flows through the holes in the side, should the tip be blocked.

• 34mm overall length
• Suits any Air Boy blow gun with 8mm tube
• Cannot be removed once attached