These reels hold 6 metres of highly flexible double skinned silicone cable suitable for use with standard multimeters.

• 1000V CATIII double / reinforced insulation | 20 Amp current rating
• 4mm Straight plug / 4mm Right angle plug
• Fully compliant to IEC 61010-031:2015

Highly accurate tester measures material thickness, including steel. For automotive, great for measuring piston head thickness.

• 90 cm cable
• 5 mHz probe frequency
• 0.8 - 500 mm range (steel)
• Up to 0.01 mm resolution (1-99 mm)
• Accuracy: H<10 mm, /- 0.05 mm | 10-99 mm /- (0.01 H/200) mm
• Next gen higher resolution

Testing brake fluid boiling point is widely regarded as the most accurate method of testing brake fluid moisture levels.

This compact unit tests DOT3 | DOT4 | DOT5 | DOT5.1.

• LCD display provides step by step instructions
• Accurate results displayed in less than sixty seconds.
• Operates on 12V supply, using vehicle's battery

A professional quality digital brake disc caliper, with durable metal construction, for reading brake caliper thickness. Fitted with a rechargeable battery for each charging. Plus avoid button batteries! No more battery replacements.

• 0 -150mm range
• Extra large display
• Simple USB recharging
• Hardened stainless steel

European made quality!

Two variants - one for light solvents / other for general use.

• Trigger with filter
• Matt top cover
• ML & OZ scale
• Stable base

European made quality!

Two variants - one for light solvents / other for general use.

• Trigger with filter
• Matt top cover
• ML & OZ scale
• Stable base

A specialised adaptor kit to remove / install front and rear wheel bearings with spindles, on the vehicle. Designed to reduce the chance of damage to the hub and bearing, while saving time. Sleeves fit most standard wheel bearing sizes.

• Suitable for use with impact wrench
• Applications: Mercedes, BMW, VW, Audi, Porsche, Volvo, Toyota, Lexus, Nissan, Infiniti, Honda, Acura

A specialised kit for replacing O-ring seals on the bottom of petrol injectors in a range of BMW engines.

This kit includes a small slide hammer which screws onto the top of the injector.

• Applications: N13 | N14 | N18 | N20 | N43 | N54 | N55 | N63 | N73 | S55 | S63 | B38 | B48
• Guide cones: 7.45mm / 7.8mm
• Seating sleeves: 8.9mm (7.8mm) | 9.3mm (8.0mm) | 9.5mm (8.1mm)
• Seating tool: 9.2mm (9.05mm)
• OEM Equiv: 130280 | 130281 | 130282 | 130283 | 130190 | 130192 | 130193 | 130194

Don't try removing fuel lines without this tool! Specially designed to make it quick and easy to disconnect the high pressure fuel line, which is near the firewall.

• Engines: BMW Mini N13 / N18
• Applications: BMW / Mini 1 & 3 series F20 / F30
• OEM equiv: 8330496242