Replacement nozzle for the Air Boy flat blow gun.

• Black POM
• 31.5mm blade width
• 58mm nozzle length
• 1/4" external thread

The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

The Air Boy thrust gun is ideal for cleaning tasks where extremely high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

The standard nozzle supplied with the gun simply screws on / is replaceable. A 90 degree nozzle is available for purchase separately.

• 1/4" BSP inlet
• 300mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

Air Boy thrust guns provide a very high air flow, and offer a safe solution, as the nozzle is unblockable. The thrust nozzle increases airflow by 100% due to the venturi principle.

Air Boy thrust guns have a wide range of cleaning applications in commercial vehicles, trade and industry.

• Max 12 bar pressure
• 600 litres / min @ 8 Bar
• 98.2 dB @ 8 Bar

The Air Boy 90 degree nozzle is now available in a new pushfit version. The function of the nozzle remains unchanged, but the pushfit connector makes it possible to remove the nozzle from the tip. The 90 degree nozzle is perfecct for cleaning out cylindrical filters etc.

The pushfit connector actively locks onto the blow gun pipe, and will not come off until the collar is lifted. Suits all 8mm dia Air Boy blow guns.

• Ideal for blowing out filters
• Works with all Air Boy 8mm dia blow guns
• Made in Denmark

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. Venturi nozzle offers no block safety functionality, and increased air flow.

• Fits all standard Air Boy blow guns, with 8mm diameter pipe.
• Made in Denmark.

A new safety blow gun from Air Boy featuring high airflow | Low noise level | Unblockable tip | Integrated chip shield.

• 600l / min @ 8 bar
• 78 db @ 6 bar
• OSHA STD 1-13.1 compliant
• Industry leading airflow for a low noise blow gun

This Air Boy blow gun is ideal for blowing out filters and other cylindrical objects. The 500mm straight pipe blow gun is supplied with a 90 degree nozzle.

The nozzle is removeable - simply lift up the locking collar, and can be used on any Air Boy blow gun with a standard 8mm dia pipe.

• 500mm Air Boy straight pipe blow gun (124140113)
• 90 degree nozzle (124LR)

A new safety blow gun from Air Boy featuring high airflow | Low noise level | Unblockable tip | Integrated chip shield.

• 600l / min @ 8 bar
• 78 db @ 6 bar
• OSHA STD 1-13.1 compliant
• Industry leading airflow for a low noise blow gun

The Jet Washer is a powerful washing gun which allows you to wash effectively without damaging the surface with high pressure. By using a combination of compressed air and water, the ideal conditions for washing where more power is needed than a common water supply can provide, are given. The Jet Washer is designed to allow operators to come close without getting wet. There is no splash back.

By using the adjustments for both air and water flow, the Air Boy Jet Washer can easily be set for the requested output. Furthermore it is possible to turn off the water directly on the washing gun. Additionally the built-in swivel allows the connected water hose to rotate freely around the washing gun. The water can be connected wither by using the supplied nipple (1/2 /¿13 mm) that fits most common water couplings or by using the built in 3/4 GHT water hose thread.

The Air Boy Jet Washer comes as a standard with a wide washing nozzle, which easily can be changed for other nozzles - e.g. the Jet Flusher nozzle.

• Powerful washing gun with wide washing nozzle.
• No splash back. Great mobility with built in swivel.
• Powerful washing guns that clean effectively without damaging the surface with high pressure.
• Combines compressed air and water. Safer than high pressure blasting.
• Both air and water flow are adjustable.
• Nozzles are interchangeable and replaceable.
• Connects to standard water connectors.

This rubber tip blow gun takes our standard 124140101 blow gun, and combines our +Lock rubber tip to provide a versatile rubber tipped blow gun.

This rubber tipped blow gun is ideal for cleaning delicate surfaces, or blowing out small diameter pipes.

• The +Lock rubber tip can be simply removed / replaced by lifting the quick lock lip.