Timing Tools Finder
OEM Search
Engine Code Search
Holden / Renault Timing Kit
A comprehensive kit for the 2.2L | 2.5L DCi diesel belt, chain and gear driven engines. These engines are also used in Renault vehicles, along with some Nissan light commercial vehicles.
- Applications: Holden Movano, Renault Espace, Laguna, Master (X70)
- Engine codes: G9U | G9T
Injector Gripper | 16mm
- 16mm injector gripper
- Application: Fiat Ducato JTD, Citroen C5, Xsara, Jumpy and Jumper HDI and Peugeot 206, 307, 406, Boxer HDI (2.0, 2.2, 2.3I)
Nissan / Renault 2.0L | 2.3L Timing Kit
The 2.0L / 2.3L DCi CDTi engine is chain driven between crankshaft & exhaust camshaft. To set the correct timing the inlet camshaft gear must be removed & the spring loaded split inlet camshaft gear must be aligned using the camshaft alignment tool. ALSO used on Renault 2.0L / 2.3L DCi CDTi chain drive diesel fitted to Espace, Koleos, Laguna, Megane, Scenic, Trafic.
- Applications: Nissan X-Trail (T31), Renault, Holden Vivaro (06-12)
- Engine codes: M9R | M9T
Nissan / Renault Crankshaft Holding Tool
A specialised crankshaft holding tool that is designed to bolt on to permit the pulley fixing to be loosened / tightened without the pulley turning.
- Engines: 0.9L H4B | 1.0L M281.920 | 1.2L H5F petrol
- Applications: Nissan Micra K14 (2018>) | Renault Captur | Clio | Megane, Smart
- OEM equiv: MOT 2054 | MOT 2006 | 281589004000
Renault / Nissan Timing Pin Kit
A set of camshaft / crankshaft pins for 1.5L | 1.9 dCi engines fitted to Renault / Nissan / Suzuki vehicles.
- Engine codes: Renault F9Q | K9K, Suzuki F9Q
- OEM Equiv: MOT1318 | MOT 1054
Renault 1.4L | 1.6L | 2.0L Timing Kit
A specialised kit for engine timing / changing the timing belt on Renault 16v petrol engines.
- Engine codes: K4J | K4M | F4R
Renault 1.6l 16v Camshaft Sprocket Holder
Camshaft sprocket locking plate is used when loosening & tightening the central camshaft holding bolt during timing belt replacement.
- Engine code: K4M (01-10)
Renault Cam Belt Kit
A specialised kit for setting / timing when replacing the camshaft drive belt on Renault petrol engines.
- Engines codes: K4J | K4M
- Suits replacement belt kits: INA530009210, Contitech CT1179K1, Gates K015671XS
Renault Camshaft Locking Tool
This locking tool holds the camshaft in the correct position on selected Renault vehicles.
- Applications: Megane | Scenic | Grand Scenic
- Engine code: F4R.770 | F4R.774
- OEM Equiv: MOT1509/01
Renault Diesel Pump Sprocket Remover
A specialised tool to remove the diesel fuel pump sprocket on 2.2L | 2.5L diesel engines without disturbing the timing belt.
For engine timing please refer to either ET1266 or ET1369.
- Applications: Holden Movano, Renault Laguna | Master
- Engine codes: G9T | G9U
- OEM Equiv:KM-6207 | MOT 1548
Renault Flywheel Locking Kit
A specialised kit for locking flywheels / front pulleys on the engines listed in the attached application list. The kit also includes primary tools for timing chain replacement on a range of twin cam petrol engines.
- Engine codes: M5M | M4R | 2TR | V4Y;Also M9R | M9T diesel for flywheel locking.
- OEM equiv: MOT 919-02 | MOT 1431 | MOT 1716 | MOT 1769 | MOT 2019.
Renault Fuel Pump Locking Tool
Locks the fuel pump and pulley in their timed position to allow for their removal / installation. However, it may still be necessary to remove the timing belt.
- OEM Equiv: KM 6239
Renault Tensioner Wrench
Tensioning wrench for the timing belt guide roller with application for Renault 1.4L (K4J) & 1.6L (K4M) engines. Male sq drv x T50 Torx (replaceable) insert.
- Engine codes: K4J | K4M
- 1/2" Sq Drv
Renault Timing Kit
A comprehensive kit for 1.4L | 1.6L | 1.8L | 2.0L petrol engines that are commonly used in Renault vehicles.
- Engine codes: Renault F4P | F4R | K4J | K4M
Renault Timing Kit
This timing tool kit suits Renault | Nissan 1.5L | 1.9L | 2.2L | 2.5L DCi diesel engines.
These engines are also fitted in Holden Movano and Suzuki Grand Vitara vehicles.
- Engine codes: F9Q | K9K | G9T | G9U
Renault Timing Pin Kit
Essential timing pins for Ford / PSA vehicles fitted with 1.6L diesel belt driven engines. The kit includes a camshaft alignment tool and crankshaft alignment / locking tools.
- Engine codes: K9K | F9Q
Ribe Impact Socket | M11
Specialised Ribe impact socket for removing flywheel fixing bolts on Nissan / Renault M9R 2.0L DCi engines.
- M11 Ribe
- 78mm overall length
- 1/2" Sq Drv
- Chrome Moly