A specialised kit for setting the balance shafts on common BMW (4 & 6 cylinder) | Mini | Citroen | Peugeot petrol engine vehicles.

• Engine codes: N42 | N45 | N46 | N46T | N52
• Engine codes: BMW 1.6 (N40 / N45 / N45T, B16, B16A, B16AC) 1.8 / 2.0 (N42 / N46 / N46T) 2.0 / 3.0 (N51 / N52 / N52-Component / N53 / N54), PSA: 1.4 / 1.6 16V (EP3 / EP6 / EP6DT / EP6DTS), Mini 1.4 / 1.6 (N12 / N14)

This kit is designed to service balance shaft on Citroen | Peugeot vehicles (and BMW Mini) with 1.4L | 1.6L petrol engines (chain) when the balance shafts have been disturbed.

Also suits BMW vehicles.

• Engine codes: N40 | N42 | N45 | N46 | N46T
• OEM Equiv: 11 4 360 | 115 140 | 11 9 280 | 11 9 330

For locking intake & exhaust camshaft at TDC plus crankshaft in position for removal of crank bolt. To adjust the camshaft timing, the cam chain tensioner must be removed & adjuster centre bolts loosened to allow the crankshaft & 2 cams to be turned independently of each other so timing can be set.

ALSO suitable for Peugeot 207, 308 & Citroen C4 with EP6 DT / DTS coded engines.

• Engine codes: BMW Mini N14 (R55 | R56) | PSA EP6DT / EP6DTS

An essential timing tool kit for BMW 1.4L | 1.6L petrol chain driven engines, as well as PSA vehicles with the EP3 | EP6 engines.

An inclinometer (ET9808) should be used in conjunction with this kit to check VVT mechanisms / chain stretch.

• Engine codes: N12 | N13 | N14 | N18 | EP3 | EP6
• Applications: BMW | BMW Mini | Citroen | Peugeot

Rigid primary chain pre- tensioner for late model new generation engines (short format), including N12 | N14 | N40 | N42 | N46 | N52. Two required for BMW V8 engines. Also suitable for BMW Mini 1.4L, 1.6L 16v N12- N14 engines & Peugeot 207, 308 Citroen C4 (EP6, EP6 DT / DTS & EP3). Use with ET1188B for N52 Cam alignment & ET1300 N14 / R56 Kit.

• OEM Equiv: 11 9 340

A specially designed socket to allow the safe / quick removal of the diesel fuel filter without damaging the plastic cover.

• Applications: Citroen: C4 | C5, Fiat Scudo | Ford Focus | C-Max | Kuga, Peugeot 307 | 308 | 407 | 607 | 807 | Volvo C70 | S40 (Mk II)
• Engines: 2.0L | 2.2L HDi engines
• 27mm
• 1/2" Sq Drv

A specialised timing kit for 2.0L & 2.2L twin cam diesel engines (DW10 | DW12) on Fiat / PSA vehicles. The twin cam system has one camshaft driven by a chain in the head, and the other by the cam belt.

• Engine codes: DW10 | DW12 | RHV | RHW | RHZ

This modest little set is designed for the 2.0L / 2.2L DOHC common rail diesel engines in Ford, Land Rover, Peugeot & Volvo vehicles.

It allows the camshaft pulley to be locked using the timing pin while securing the flywheel / ring gear with the locking pin & plate. The cam belt transmits drive from crankshaft to camshaft then from one camshaft to the other by chain located in the cylinder head.

• OEM Equiv: 303-393 | 303-393-01 | 303-1059 | 303-1277

This kit contains specialised pins for locking flywheels, camshaft sprockets and aligning the crankshaft and fuel pump on a wide range of Duratorq engines.

• Includes special pins for 2.0L | 2.4L chain driven engines

A specialised set for removing PSA 2.0L | 2.2L HDi (DW10 | DW12) diesel fuel injectors (Bosch | Siemens). Allows the removal of seized injectors without the need to remove the cylinder head. Bridge fits onto the cylinder head allowing for safe removal of the injectors.

• Unscrew injector cap
• Extract internal sleeve from injector
• Thread force screw into injector
• Lower the bridge assembly over the force screw
• Screw down the force screw nut. Hold the force screw with a spanner

Designed to hold camshaft / crankshaft in their timed position during belt replacement. Suits the latest generation Citroen / Peugeot EB0 & EB2 1.0L | 1.2L 3 cylinder engines.

• Engine code: EB2
• Applications: Citroen C3 | C4 DS3, Peugeot 208 | 308 | 2008

Essential kit for timing belt replacement on 1.8 | 2.0 'EW' coded petrol engines. This includes engines with VVT / HPi

This kit includes both locking pins for cam / crankshafts and also a steel clip for fitting the cambelt and a tensioner specific to the engines this kit suits.

• Engine codes: EW7 | EW10 | EW12

A specialised timing kit for locking camshafts in their timed position on late model EB2 turbo charged engines. These engines have a camshaft alignment feature which allows access through the top by removing the plastic cam cover.

Includes belt gauge to check for timing belt tension and condition. This suits both EB0 1.0L and EB2 1.2L 3 cylinder wet belt engines.

• Engine: EB2 1.2L
• Applications: Citroen C3 | C4 Cactus | DS3, Peugeot 208 | 308 | 2008 | Partner
• OEM Equiv: 0109 2B | 0109-2C | 0109-2D | G-0109-6

This kit is ideal for use on earlier PSA engines to lock the engine pulley or as a top up kit for lost pins. Use with the ET1625 valve spring compressor to set correct cam belt tension.

Relieves valve spring loads on pre 2003 SOHC PSA petrol engines placed on by the cam through compression of the valve springs due to contact, thus allowing the correct camshaft belt tension to be set. Use with ET1655 pins & other locking tools to secure the engine pulley.