A specialised cylinder head rebuilt kit designed to allow the camshafts to be correctly fitted into the cylinder head on Porsche / VAG common rail engines.

The set contains a jig, various camshaft support fixtures, gear tooth alignment clamps and locking devices.

• OEM Equiv: T40094 | T40095 | T40096
• Applications: VAG 1.6L | 2.0L | 2.7L | 3.0L | 4.0L | 4.2L diesel CR engines | Porsche 3.0 TDi
• For timing servicing on 2.7L - 4.2L engines, also refer ET1622.

Quickly / safely install rear crankshaft seal flanges on 1.8L | 2.0L TSI | TFSI chain drive engines.

• Applications: Audi A4 (08-16), VW: Golf (15-17) | GTI (08-17) | Jetta (12-17) | Passat (14-17) | Tiguan (09-17)
• Engines: CCZ
• Gearbox size
• 86mm dia
• OEM equiv: T20097

Timing chain tension lever designed to be used with the ET0900. Broad range of applications on 1.8L | 2.0L TSFI engines.

For pretensioning the timing chain and unlocking the chain tensioner. Attach to the cylinder head, and then push back the chain tensioning rail. Allows for replacement of timing chain without needing to remove the front cover.

• EA888 Gen III engines (but can also be used with Gen 1 & II)
• Engine codes: 1.8L | CDAA, CDHB, CJEB, 2.0L | CCZA | CCZB | CCZD | CDNB | CESA | CPSA
• OEM Equiv: T40243
• Designed to be used in conjunction with timing kit ET0900

Locking kit for a wide range of VAG 1.8L | 2.0L TFi / TFSi chain drive engines. Plus camshaft adjuster valve tools & crankshaft pulley holding tool.

• OEM Equiv: T10355 | T10368 | T10352 | T10352/1 | T20208 | T40011 | T40267

A specialised kit designed to lock the camshafts and crankshaft in position when servicing VAG EA888 4 cylinder 1.8L | 2.0L 16V petrol engines (2010-).

• Engines: 1.8L: BYT | CDAA | CDHB | CJEB 2.0L: CABB | CAWA | CAWB | CCZA | CCZB | CCZC | CCZD | CDNB | CDNC | CDND | CESA | CPSA

A specialised kit for removing the camshaft sprocket from the taper on the camshaft on Pumpe Duse / common rail diesels. Includes a counter hold tool for loosening / tightening the camshaft hub bolt.

• Engines: 1.9L | 2.0L TDI
• OEM Equiv: T10051 | T10052

This puller is designed for the removal of balance shafts fitted to 1.8L | 2.0L chain driven 4 cylinder petrol engines.

• M8 x 1.25 internal thread

Locking tensioning pin for ribbed V belts.

• Engine codes: AAH | AFC | AAN | APB | AHA | ATQ | AVK | ART | AWN | BBD | BWA
• OEM Equiv: T10060/A

For servicing the camshaft adjuster securing bolt on 2.0L TFSi engines. M10 Polydrive (short version) - longer version T10070.

Do NOT use a standard Torx socket when removing the bolt on the camshaft sprocket.

• M10 Polydrive (6 splines)
• 54mm length
• OEM Equiv: T40080
• 1/2" Sq Drv

Used for the removal / installation of the 4 / 3 way central valve for camshaft adjustment. Applicable to many TFSI direct injection engines (Gen III).

• Engine codes: CCZA | CCZB | CCZC | CDAA
• OEM Equiv: T10352

A set of three assembly camshaft tools for removing camshaft control valves before chain removal, on 4 Cyl chain drive petrol engines.

• Application: 1.8L | 2.0L 4 Cyl chain drive petrol engines
• OEM Equiv: T10352 | T10352/1 | T10352/2
• 3/8" Sq Drv

A specialised kit for removing / installing the camshafts on VAG petrol engines. Please refer to ET0900 for the relevant timing tool kit.

• Engines: 1.8L | 2.0L TFSI Turbocharged 4V
• OEM Equiv: T40191 | T40196

A specialised wrench to hold the pulley while loosening / tightening the pulley fixing bolt. This tool is recommended by the manufacturer to set the No. 1 cylinder at TDC. Covers engines from 2006 onwards.

• Applications: 1.8L | 2.0L TFSi / TSi petrol engines
• OEM Equiv: T10355

A specialised socket for turning the crankshaft to set TDC position on 2.5L 4V Turbo VAG petrol engines.

• Engine codes: CEPA | CEPB | CTSA | CZGA | CZGB
• OEM Equiv: T03003A

A comprehensive / specialised kit for servicing the two part engine support steady bar bush that is fitted to the front subframe of certain VAG models. This kit allows for sealing off the side of the aperture to enable easy extraction / insertion of the bushes, as well as allowing this task to be done without removing the subframe from the vehicle.

A time saving workshop tool.

For mounting and aligning the oil pump gear on Audi 2.5L including 5 cylinder turbo engines with 20 valve (4 valves / cylinder) cylinder heads.

• OEM Equiv: T03005A
• Application: Audi TT (07-) 2.5 ltr. 4-valve turbo TTRS

A popular timing tool kit for a wide range of common Audi / Skoda / VW vehicles including many 1.4 | 1.9 | 2.0 TDi PD DOHC engines.

• Includes two versions of the camshaft sprocket locking tool.
• For belt driven diesel engines.

A set ot two cam belt tensioner tools for Volkswagen 4 Cyl TDI PD SOHC diesel engines. Also certain Audi / Skoda applications. These tension tools are designed for Pumpe Duse and Common Rail diesels fitted with larger engine mounting brackets.

• OEM Equiv: T10264 | T10265

A specialised timing tool kit is for 1.8L | 2.0L TSi / TFSi 4v engines. This kit includes a TDC indicator. The TDC indicator needs to be used in conjunction with a DTI gauge. The DTI gauge (ET1101) is not included in the kit, but is available separately.

This kit is designed to allow removal / replacement of the timing chain and camshaft sprockets. The kit includes special camshaft pulley locking blocks for late model Gen 3 TSi / TFSi engines.

On third-generation EA888 1.8 and 2.0L 4V TFSI engines, the ET0037A is required to remove the damper pulley when servicing the timing chain.

A comprehensive timing tool kit for belt tensioning a wide range of 1.8L | 2.0L petrol FSi / TFSi engines. The kit includes locking pins, camshaft alignment tool and tensioner wrench.

This kit includes necessary tools for servicing the chain in head and establishing correct valve / camshaft timing.

Applications for Audi A3 | A4 | A6 | S3 | TT

OEM Equivalents & Engine Codes:

• DA0379-23: VAG 3366, VAG T20018, VAG T20044
• ET1020A: BMW 11 2 300, Holden KM 813, Land Rover LRT 12-108
• ET1084-1: VAG T10092
• ET1084-3: VAG T10252
• ET1220B: VAG T10020
• ET2207-3: VAG T10060/A, VAG T40098, VAG T20167, VAG 3204
• TT4001: VAG T40011
• AXW | AXX | BGB | BHZ | BLR | BLX | BLY | BMB | BPJ
• BUL | BVY | BWA | BWE | BYD | BZC | CDLB | CDLC | CDLG

Valve timing kit for late model Audi FSI chain driven engines common to V6 | V8 | V10 engines.

• OEM Equiv: T40069 | T40070 | T40071

This timing kit is designed for Audi 2.5L chain driven petrol engines. These tools lock the engine into its timed position for replacing the timing chain, or checking cam timing.

• Applications: Audi RS3 | RS Q3 | TT
• Engine codes: CZGA | CZGB | CEPA | CEPB | CTSA
• OEM Equiv: T03003 | T03006 | T40069 | T40070 | T40079

An essential tool for maintaining engine timing whenever the front vibration damper is removed. For instance, when replacing crankshaft oil seals.

Additional tools are required for replacing the engine timing chain (see ET0900 / ET9716).

• Application: 3rd Gen EA888 TFSI engines.
• OEM Equivalent: T10531