Pressure Testers

This test performs leak down tests which can be more accurate than normal compression tests.

Leak down tests can be used to detect various engine faults including leakage past rings, head gaskets, intake / exhaust valves etc.

• Requires air source of 70-160PSI, as the unit will pressurise system to 60PSI.
• Spark plus thread hoses: 10, 12, 14mm | regulator & o-rings

This kit contains a special cap, and gauge in order to test oil pressure on a range of BMW engines.

• Engines: N20 | N46 | N55
• OEM equiv: 119250

Easy to read 2-1/2" diameter gauge features colour coded quadruple calibrations. 6" heavy duty stem with universal rubber cone adaptor fits all plug holes. Convenient pressure holding side release valve. Provides an accurate reading on high performance engines.

• 0-300 PSI | 21kg/cm | 21 Bar | 2100kPA
• 13" durable rubber hose with 14mm | 18mm adaptors.

This cylinder leakage kit can diagnose a range of engine faults including blown head gaskets, cylinder head cracks, and worn piston rings / valves.

The twin gauge manifolds shows percentage of cylinder leakage, and cylinder pressure. Suitable for use on petrol engines with 10 | 12 | 14mm spark plugs.

For deeply recessed spark plugs, a long reach compression test adaptor may be required.

• Suitable for use with 10mm / 12mm / 14mm spark plugs.
• Readings: cylinder leakage / cylinder pressure (psi / bar)

Comprehensive set with adaptors to suit most common Asian / European / US vehicles. These connectors are not interchangeable with the ET7191 compression test kit.

• Normal operating range: 750PSI
• Gauge: 0-1,000 PSI

Tests return flow pressure from Bosch | Delphi | Siemens common rail injectors. Suitable for testing Piezo pass / fail statement.

• Gauges: 1-3 Bar & 1-15 Bar.
• Transparent body to check for air pockets / diesel fuel condition.

A great kit for checking engine oil pressure in cars & trucks. Adaptors for most common vehicles. Pressure scale 0-100 PSI (0-700kPA).

• Adaptor (1/8-27 to 1/4-18)
• Adaptor (1/8-27 to 1/4-28 BSPT)
• Adaptor (1/8-27 to M12x1.5)

Hose Assembly

• Adaptor (1/8-27 to 3/8-18)
• Adaptor (1/8-27 to M10x1.0)
• Adaptor (1/8-27 to M14x1.5)
• 2" Large nipple

Adaptors include for most vehicles / light trucks.

• 0 - 100 PSI gauge range

Covers wide of modern engines including HDi / TDCi / Pumpe Duse. Includes clamp on injectors, 0-50 Bar gauge, straight / right angled quick connect fittings, and extensive range of glow plug / injector adaptors. Additional gauge for incoming pressure. Suits most car / truck / agricultural / marine diesel engines.

• Spark plug sizes: 10 | 12 | 14 | 18mm
• Injectors: M20 | M22 | M24 & Ford Stanadyne injector clamp on injector

This petrol injector test kit contains an extensive range of adaptors giving it universal application for Asian / European / US vehicles.

This kit is ideal for testing Bosch CIS, GM TBI and other fuel injection systems. However please note that it is not suitable for GDI systems.

• Large 3" gauge (0-100PSI / 0-700kPA)
• Quick coupling design

Test and diagnose most systems that require pressure or vacuum to operate. Transfer fluids. One person brake bleeding

• Comprehensive adaptor kit included
• Range -30 to 30 PSI

Suits most passenger vehicles. Two gauges (0-100 PSI / 0-500 PSI) for low / high pressure ranges.

Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks.

• Includes 3 pairs of stepped adaptors to fit most sizes found on commercial vehicles.
• Includes pressure gauge, shut off valve, and pressure release valve.
• Adaptor sizes: 105 - 130mm

Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks. Simply pressurise using shop air.

The maximum pressure in most turbo systems is approximately 15 PSI - 25 PSI. When connecting the airline to these test caps, always regulate air pressure in the test to 25 PSI maximum. Over pressurisation will damage system components.

A graduated approach to leak testing is recommended. Start with 5 PSI to find large leaks, and progressively increase in 5 PSI increments.

• Kit includes 4 pairs of stepped adaptors to fit most sizes found on passenger vehicles.
• Includes pressure gauge, shut off valve, and pressure release valve.
• Adaptor sizes: 35-90mm

A handy tester to detect faulty components in vacuum systems as well as mechanical fuel pumps.

• Large 62mm diameter gauge
• Pressure: 0-10 PSI (0-70kPa | Vacuum: 0-30 In-Hg (0-100 kPa)
• 750mm rubber hose

Dual function (vacuum / pressure) kit with wide applications. Test vacuum systems. Transfer fluids. Bleed brakes.

• Test fuel, ignition, transmission, emission, air conditioning systems
• Comprehensive adaptor kit included
• Range: -30 to 60 PSI

Creates and holds a metered vacuum. Applications include one-man brake bleeding, vacuum testing and pressure testing fuel systems.

Brake bleeder & connector pack included.

• Switch air intake control valve: In - for testing vacuums | Out for pressurising systems
• 0 - 60 PSI (0- 4 Bar) pressure range
• 0 to -30 vacuum range