Cleaning Tools

A high quality, European made, foamer for professional cleaning / car detailing.

• EPDM seals
• 110 degree foamer nozzle
• 1.5 litre tank capacity (recommended to fill to 1L only)
• Viewing stripe with graduated scale
• Stable base

When you need a professional, durable, dependable sprayer. Made in Europe quality...

• Acid wash / Ammonia based cleaners, including Mag Wheel cleaners, and Hy Clor liquid chlorine.
• Comes with 1.5L container

When you need a professional, durable, dependable sprayer. Made in Europe quality...

• Alkaline Cleaners
• Degreaser
• Anti Splatter chemicals
• Methylated Spirits (Denatured Alcohol)
• Comes with 1.5L container

When you need a professional, durable, dependable sprayer. Made in Europe quality...

This unit is ideal for use with brake cleaner / tyre shine (petroleum based only - for silicon refer 124EP15) / diesel / kerosene / Prepsol / Turpentine.

• Viton seals / PA plastic, resistant to most hydrocarbon based solvents
• Viewing stripe with graduated scale
• Innovative pressure release button
• Protective cap to protect the one way return valve
• Stable base
• Large 1.5L tank
• Replacement seal kits available
• Brake Cleaner* excluding CRC Brakleen (due to acetone)
• Tyre shine

Extended nozzles for Air Boy pressure sprayers. Direct spray exactly where it's needed!

Extended nozzles for Air Boy pressure sprayers. Direct spray exactly where it's needed!

Extended nozzles for Air Boy pressure sprayers. Direct spray exactly where it's needed!

European made quality!

Two variants - one for light solvents / other for general use.

• Trigger with filter
• Matt top cover
• ML & OZ scale
• Stable base

European made quality!

Two variants - one for light solvents / other for general use.

• Trigger with filter
• Matt top cover
• ML & OZ scale
• Stable base

This angled flow thru parts cleaning brush is designed for parts washing sinks with circulating solvent systems. A continuous stream of solvent is delivered through the whole bristle head not just through the centre.

• Suits most parts washers
• 12" (305mm) overall length

This cleaning brush set consists of a curved and straight brush. Ideal for cleaning parts, rust and those hard to reach areas.

• Brass bristles
• 190mm steel handle
• 2 pce set

This cleaning brush set consists of a curved and straight brush. Ideal for cleaning parts, rust and those hard to reach areas.

• Nylon bristles
• 190mm steel handle
• 2 pce set

This cleaning brush set consists of a curved and straight brush. Ideal for cleaning parts, rust and those hard to reach areas.

• Stainless steel bristles
• 190mm steel handle
• 2 pce set

This cleaning brush set consists of a curved and straight brush. Ideal for cleaning parts, rust and those hard to reach areas.

• Steel bristles
• 190mm steel handle
• 2 pce set

Versatile cleaning brush set comprising brushes with brass | nylon | steel bristles respectively. Ideal for general cleaning tasks such as removing carbon, dirt, rust, paint etc

• Brass | Nylon | Steel bristles
• 190mm length

Versatile parts cleaning brush with wooden handle, and heavy duty nylon bristles. Ideal for cleaning engine spare parts, and all other similar small items.

• Head diameter: 25mm | 260mm overall length.
• Can be used with general cleaning solvents.

Save money with this value pack of 5x DA1132 cleaning brushes.

These versatile parts cleaning brushes have wooden handles, and heavy duty nylon bristles. Ideal for cleaning engine spare parts, and all other similar small items.

• Head diameter: 25mm | 260mm overall length.
• Can be used with general cleaning solvents.

An effective / easy to use tool for cleaning peak & hold (not GDI) petrol injectors in an ultrasonic cleaner. Clean up to eight injectors simultaneously.

The cleaning process with this tool is to reverse the injectors usual flow so that any carbon build up is dispersed out to the top of the injector, ensuring all foreign particles are removed from the injector pintle and bore.

• Reverses normal injector flow
• Injectors pulsed from 800 - 6,000 RPM
• Uses 12V power source.

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 330 x 270 x 150mm
• 40kHz frequency
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

A workshop quality touch control ultrasonic cleaner. This larger size is ideal for cleaning manifolds as well as smaller parts. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 500 x 300 x 200mm
• Dual 33kHz (coarse) / 40kHz (intensive) frequency
• 600W ultrasonic power / 500W heating power
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer (1-99 minutes working time)
• Digital temperature setting (0-80 degrees C range)

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 240 x 140 x 100mm
• 120W ultrasonic power / 100W heating power
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

• 1 teaspoon per litre of water
• High alkaline, double cleaning power for all metals.
• Ideal for the automotive industry to clean alloy & steel parts.
• No chromates
• Biodegradable

This cleaning powder is designed for use with ultrasonic cleaners, especially for softening carbon when cleaning engine parts.

This is a strong alkaline cleaning solution. Appropriate safety precautions should be taken at all times, including the use of gloves / safety glasses.

• 1 teaspoon per litre of water
• High alkaline, double cleaning power for all metals.
• Ideal for the automotive industry to clean alloy & steel parts.
• No chromates
• Biodegradable