Workshop Tools

The largest of the Endeavour range of pry bars. Professional quality Chrome Moly 22mm dia steel shaft, with blackened finish. Textured handle with hammer cap.

• 1,220mm long
• 45 degree bent tip
• Chrome Moly 22mm steel shaft
• Comfortable soft grip handle

A special self gripping puller with slim legs. Able to be used with a slide hammer.

• Spread: 150mm
• Reach: 150mm
• Capacity: 1.1 tonnes

A special self gripping puller with slim legs. Able to be used with a slide hammer.

• Spread: 15 - 200mm
• Reach: 200mm
• Capacity: 1.17 tonnes

• SPREAD: 80mm
• REACH: 90mm
• CAPACITY: 1.1 tonnes

Simply convert your standard 3/4" flexible breaker bar, into a ratcheting breaker bar. This ratcheting head just goes on the end of any standard 3/4" Sq Drv breaker bar.

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

A high quality, European made, foamer for professional cleaning / car detailing.

• EPDM seals
• 110 degree foamer nozzle
• 1.5 litre tank capacity (recommended to fill to 1L only)
• Viewing stripe with graduated scale
• Stable base

When you need a professional, durable, dependable sprayer. Made in Europe quality...

• Acid wash / Ammonia based cleaners, including Mag Wheel cleaners, and Hy Clor liquid chlorine.
• Comes with 1.5L container

When you need a professional, durable, dependable sprayer. Made in Europe quality...

• Alkaline Cleaners
• Degreaser
• Anti Splatter chemicals
• Methylated Spirits (Denatured Alcohol)
• Comes with 1.5L container

When you need a professional, durable, dependable sprayer. Made in Europe quality...

This unit is ideal for use with brake cleaner / tyre shine (petroleum based only - for silicon refer 124EP15) / diesel / kerosene / Prepsol / Turpentine.

• Viton seals / PA plastic, resistant to most hydrocarbon based solvents
• Viewing stripe with graduated scale
• Innovative pressure release button
• Protective cap to protect the one way return valve
• Stable base
• Large 1.5L tank
• Replacement seal kits available
• Brake Cleaner* excluding CRC Brakleen (due to acetone)
• Tyre shine

Extended nozzles for Air Boy pressure sprayers. Direct spray exactly where it's needed!

Extended nozzles for Air Boy pressure sprayers. Direct spray exactly where it's needed!

Extended nozzles for Air Boy pressure sprayers. Direct spray exactly where it's needed!

European made quality!

Two variants - one for light solvents / other for general use.

• Trigger with filter
• Matt top cover
• ML & OZ scale
• Stable base

European made quality!

Two variants - one for light solvents / other for general use.

• Trigger with filter
• Matt top cover
• ML & OZ scale
• Stable base

Professional quality 18" breaker bar.

Replacement heads available.

Professional quality breaker bar with ratcheting head. The ratcheting head has a three way mechanism - lock / right / left, and is rated to a maximum torque of 1,000Nm.

Made from heat treated drop forged CrV steel with a mirror chrome finish.

• 24" / 600mm long
• 1/2" Sq Drv

Extra long double box wrench set designed for accessing hard to reach areas. Mirror chrome finish. Made from durable 6140 alloy steel.

Contains six imperial size wrenches.

• 1/4 x 5/16
• 3/8 x 7/16
• 1/2 x 9/16
• 5/8 x 11/16
• 3/4 x 7/8
• 13/16 x 15/16

Extra long double box wrench set designed for accessing hard to reach areas. Mirror chrome finish. Made from durable 6140 alloy steel. Zero degree offset.

Contains six metric size wrenches.

• 8x10
• 12x14
• 13x15
• 16x18
• 17x19
• 22x24

This angled flow thru parts cleaning brush is designed for parts washing sinks with circulating solvent systems. A continuous stream of solvent is delivered through the whole bristle head not just through the centre.

• Suits most parts washers
• 12" (305mm) overall length

Made from a lightweight / durable plastic, these angled tip pliers are designed to shut off / restrict flows in a wide range of automotive applications. For instance brake / fuel / heater / vacuume hoses.

• 3 pce set (155mm | 165mm | 225mm)
• Special rounded jaw design to avoid damaging hoses
• Ring lock holds the pliers in desired position.

Measures angle of rotation following pre-torque adjustment. 0-360¡ measurement range in 2¡ increments. Rotate housing to zero gauge.

• 1/2" Sq Drv

This surge protector is designed to protect on-board electronics from the voltage spikes that may occur while employing electric power from an external source for fast starting purposes (battery connected to another vehicle or booster, or when welding).

Connect the two clamps to the battery poles. The red light indicates operating voltage (12V/24V). The buzzer sound indicates the presence of voltage spikes that the surge protector is dispelling.

Hardened drop forged alloy steel jaws for pulling internal bearing caps, seals bushings. A cone holds the jaws in place during pulling. Use with a 5/8-18 slide hammer.

• 5/16" - 3-1/4" spread
• 3-1/2" reach

An extra long prybar with tang thru design. Ideal for heavy duty automotive / industrial prying work. Features a comfortable rubber handle, with a hardened shaft.

• 940mm overall length
• Bent tip

A specialised kit for extracting blind hole bearings. This kit contains eight adaptors plus a slide hammer and two leg puller.

Please refer to the download link below for instruction manual / kit components.

Handy guide for checking bolt / stud / screw's - pitch, length and diameter. Suits 18 common metric & imperial sizes

• Metric sizes: M10x1.5 | M12x1.75 | M12x1.5 | M12x1.25 | M13x1.25 | M13x1.5 | M14x1.25 | M14x1.5 | M15x1.5 | M16x1.5 | M17x1.5 | M18x1.5 | M20x1.5 | M22x1.5 | M24x1.5 | M26x1.5
• 1/2"-20 | 3/4"-16
• Plus 5cm ruler, and flange diameter gauge (10 - 50mm)

Aluminium tailgate support extends to 130cm to suit most SUVs / 4WDs. Hook provides added functionality - depressing brake pedals etc.

• With locking pins for added safety. The locking pins are a safer option compared to other tailgate supports which lock with a twist action.

An optional hose to use with the ET3586 fluid extractor. Converts our fluid extractor into a suction brake bleeder, with the benefit of a large 10L tank.

• Use with ET3586 fluid extractor
• 420mm length

A handy tool for single handedly depressing the brake / accelerator pedal, as well as holding the steering wheel firmly in place during wheel alignment testing.

• Trigger controlled mechanism, with thumb lock release.
• Supplied in blow mold case
• 450mm overall length

C Hook wrench set with interchangeable heads. Includes both hook and pin type configurations which are ideal for automotive, industrial, agricultural applications.

• Size range: 19mm - 166mm
• Pin type & hook type configurations.
• Ratcheting handle

This cleaning brush set consists of a curved and straight brush. Ideal for cleaning parts, rust and those hard to reach areas.

• Brass bristles
• 190mm steel handle
• 2 pce set

This cleaning brush set consists of a curved and straight brush. Ideal for cleaning parts, rust and those hard to reach areas.

• Nylon bristles
• 190mm steel handle
• 2 pce set

This cleaning brush set consists of a curved and straight brush. Ideal for cleaning parts, rust and those hard to reach areas.

• Stainless steel bristles
• 190mm steel handle
• 2 pce set

This cleaning brush set consists of a curved and straight brush. Ideal for cleaning parts, rust and those hard to reach areas.

• Steel bristles
• 190mm steel handle
• 2 pce set

Versatile cleaning brush set comprising brushes with brass | nylon | steel bristles respectively. Ideal for general cleaning tasks such as removing carbon, dirt, rust, paint etc

• Brass | Nylon | Steel bristles
• 190mm length

Comprises extra long (400mm) single end half moon ring wrench, with 8 interchangeable 12 point ring wrench heads. Head sizes: 12, 13, 14, 15, 16, 17, 18, 19mm. Ideal for removing / replacing bolts securing the timing tensioner and auxiliary pulleys on late model European engines.

• Length: 387mm (15-1/4")

A great tool for extracting surplus diesel when disconnecting the fuel filter. And then to reinsert diesel to prime diesel fuel filters after replacement. Supplied with quick release connectors to suit most vehicles.

• Transparent design | Rotative switch off
• Adaptors: male 5/16" | 3/8" male, female 5/16" | 3/8"
• 1.5 litre capacity

• 15W | 1,200 Lumens
• Use either with 240V power, or rechargeable battery

• 15W | 1,200 Lumens
• Use either with 240V power, or rechargeable battery
• TruColour LEDs replicate daylight conditions