Bush Tools

A specialised kit for removing / installing differential mounting bushes in BMW rear subframes.

A time saving tool allow for on vehicle servicing. Does not require the suspension to be disassembled, nor the complete removal of the subframe.

• Applications: BMW F01 | F02 | F06 | F06 | F10 | F11 | F13
• OEM bushes: 33316792873 (3331 6792 873)

A specialised servicing kit for differential mounting bushes in the BMW rear subframe.

A time saving kit, allowing for on vehicle maintenance of the differential mounting bushes at the front of the subframe This kit avoids the need to disassemble the suspension or for complete removal of the subframe (only lowering is required).

• Applications: E46 | E85
• Suits genuine bushes: 33176770788

A specialised tool designed for removing / installing differential mounting bushes in the rear subframe of BMW vehicles.

A time saving tool as it allows for on vehicle servicing, without the need to dismantle the suspension / remove the subframe.

• Applications: F01 | F02 | F06 | F07 | F10 | F11 | F13
• OEM Bushes: 3331 6792 873 (33316792873)

A specialised kit for the removal / installation of differential mounting bushes in the rear subframe.

This is a time saving kit as it allows for the on vehicle maintenance of the differential mounting bushes (#33176751808), without the need to disassemble the suspension / completely removel the subframe.

• Applications: E46 | E85

This tool is a great timing saving device. It allows for the removal / installation of the rear subframe mounting bush, without having to completely remove the subframe assembly.

This kit contains hydraulic rams, pads and tubes to remove front lower arm metallic bushes. A 10 tonne hydraulic pump (not included) is recommended to be used with this kit.

• Applications: E31 | E32 | E34 | E38 | E39 | E53 | E60 | E65 | E66 | E70 | E82 | E87 | E88 | E90 | E91 | E92 | E93 | F01 | F02 | M3

A time saving tool for removal and reinstallation of the caster arm (thrust arm) bushing mounts on BMW 3 Series vehicles.

• Chassis: E30 | E36 | E46

A time saving tool for the removal and replacement of metallic bushes on rear axles BMW E36 | E46 models. This kit allows for the replacement of the mounting bushes without lowering the complete rear axle assembly.

• Models: E36 | E46

A specialised kit for removing / installing both bushes at the rear of the vehicle on the stub assembly below the brake caliper.

• Applications: E87 | E90 | E91 | E92 | E93
• OEM bush number: 3332 6763 092 (33326763092)

This kit is designed to assist with the removal / replacement of metallic joint bushes (33 32 6 767 748) on the rear stub axle of many BMW vehicles.

A time saving kit for servicing upper / lower bushes on 5 series (E39) | 7 series (E38) vehicles.

Do NOT use with impact tools.

• Chassis: E38 | E39 | E52 | E53 | E60 | E61 | E63 | E65 | E66 | E70

This kit contains the tools necessary to remove and install the rear axle carrier mount bushings on BMW E39 sedan and wagons.

A time saving kit as it allows for the replacement of the bushes without completely removing the sub frame assembly.

• OEM Bushes: 33311091422 (3331 1091 422) | 33311094036 (3331 1094 036)

A specialised kit for the removal / installation of the sub frame mounting bushes. A time saving kit as it allows for the replacement of the bushes without completely removing the sub frame assembly.

• Applications: E46 | E85

This kit contains hydraulic rams, pads and tubes to remove upper sub frame caster bushings for aluminium arms. A 10 tonne hydraulic pump (not included) is recommended to be used with this kit.

• Applications: E31 | E32 (31 12 1 136 607), E34 (31 12 1 139 456), E38 | E39 (31 12 0 006 482), E53 (31 12 1 096 372), E65 | E66 (31 12 0 303 754)

This kit contains hydraulic rams, pads and tubes to remove upper sub frame caster bushings for aluminium arms. A 10 tonne hydraulic pump (not included) is recommended to be used with this kit.

A specialised kit for removing / installing the upper sub frame bushing. A time saving kit as it can be used without having to remove the arm from the vehicle.

• OEM Bush # 31120393540 | 31126763719 | 31102283579
• Applications: E82 | E84 | E87 | E88 | E89 | E90 | E91 | E92 | E93 (Also suits new style bush in M3 / M Coupe)

A time saving tool for the removal / installation of Ford differential support bushes in the rear sub-frame. This tool allows for the servicing on car, avoiding the need to remove the sub frame.

The differential only needs to be lowered by around 10cm in order to facilitate access to the three bushes in the rear.

• Applications: Ford Falcon BA | BF | BG, Territory

A specialised tool to adjust upper control arm cams on Holden vehicle platforms - GMT 600 | GMT 800 | GMT 900.

The adjusting tool surrounds the entire perimeter of each cam to provide a solid no slip means to reach an often rusty OE cam.

• Applications: Silverado

This tool is design for the removal / installation of the bush at the centre of the rear trailing arm on many popular Honda vehicles.

A time saving tool, as it is designed to be used on vehicle. Takes only around 10 minutes / side. A hydraulic press is not needed to remove the old bush or to install the replacement.

• Applications: Civic (88-00) | Del Sol | CRX | CR-V (K6 / K8: 97-02) | Integra (94-01)

A specialised kit for the removal /installation of rear differential to subframe mounting bushes. A time saving kit, as it allows for on vehicle maintenance of the differential mounting bushes without the need to disassemble the suspension, or completely remove the subframe.

• Applications: W140 | W202 | W203 | W210

A combination of the ET1111 and ET1111B kits, this specialised kit is designed for the removal & installation of the front lower suspension arm bushes on the selected Mercedes vehicles.

This combination kit offers major time savings, as it allows for the bush replacement to be done on vehicle without having to fully remove the arms.

A specialised - timing saving - tool for removal / installation of the front caster arm bushes on Mercedes vehicles.

This kit allows for the bush replacement to be done on vehicle, without having to remove the arm.

• Models: W203 | W211 | W220

A specialised kit for removing / installing the front subframe bush on selected Mercedes vehicles. A time saving kit - allowing for on vehicle maintenance, while using a hydraulic cylinder to speed up the job.

• Applications: W203 | W204 | W211 | W212 | W220 | W221

This suspension bush remover and installer is a designed for on car maintenance and replacement of the rear sub-frame differential metallic bush on Mercedes W163 chassises.

A real time saving tool!

• Application: W163 chassis

Designed for timing saving, on car maintenance, this tool optimises the replacement of bushes on MITSUBISHI VIRAGE 1.8 and MITSUBISHI LANCER 1.6.

Importantly it avoids damage to ABS sensor cable, trailing arm and parts close to the bush during maintenance. The window indicator is for reference during removal and installation.

• * Application MITSUBISHI LANCER 1.6 (1993-2000) | VIRAGE 1.8 (2000 onwards)

A comprehensive / specialised kit for servicing the two part engine support steady bar bush that is fitted to the front subframe of certain VAG models. This kit allows for sealing off the side of the aperture to enable easy extraction / insertion of the bushes, as well as allowing this task to be done without removing the subframe from the vehicle.

A time saving workshop tool.

A specialised kit for removing / installing rubber metal mounts for the front lower control arm.  This kit allows for replacement to be done on vehicle, saving time & money.

• Applications: Audi A3 | A7, Porsche Cayenne, VW Touareg

A specialised tool for extracting / installing the shock absorber upper base nut of Volvo trucks.

A specialised kit for removing / installing the front lower control arm bush on VW T5 Transporters.

• Application: VW T5 Transporter

This kit contains four subframe alignment pins with an M14 thread designed specifically for the VW Transporter T5. This kit is essential when replacing rubber bushings, and for all jobs where the auxiliary frame (subframe) is removed.

• Application: VW Transporter T5 (2004>)
• OEM Equiv: T10227