Spline

Specialty socket which is slightly undersized to avoid damage when removing sump plugs / gear boxes on selected VAG vehicles.

• Type: Spline (Sec)
• Size: M16
• Length: 60mm
• Drive: 1/2" Sq Drv

A specialised Spline (Sec) socket for working on rear hubs on VW Golf | Jetta and other Mark IV chassis vehicles.

• M18 Spline (Sec)
• 78mm overall length
• 1/2" Sq Drv

Impact grade spline socket set covering popular sizes for VAG Group vehicles. Sockets are 1/2" Sq Drv by 78mm long.

• M12 (Rear hub nuts on Touran)
• M14 (Rear hub nuts on Transporter)
• M16S (Rear hub nuts on Sharan)
• M18S (Rear hub nuts on Golf)

This specialised spline security socket is required when working on rear hubs of VW Golf | Seat Leon vehicles.

• M18S Spline security
• 3/4" Sq Drv

A handy set of spline bit sockets of sizes commonly used on engine head bolts. The long shaft allows access to recessed bolts.

• Sizes: M6 | M8 | M10 | M12 | M14 | M16
• 140mm overall length
• 1/2" Sq Drv

A specialised spline bit socket for use on ball joints on VW LT | Transporter | Touran, and rear caliper bolts on VW Passat and Audi A3. Part of the Endeavour Tools range of specialised bit sockets.

• M14 Spline bit socket
• 100mm overall length
• 1/2" Sq Drv

A specialised spline bit socket for removing the bolts that connect the driveshaft to the gearbox, on VAG vehicles.

• M7 Spline bit socket
• 1/2" Sq Drv
• 55mm overall length

A set of spline sockets from M4 - M16 in three different drive sizes. Spline sockets have many common automotive / industrial applications.

Professional quality CR-V sockets with impact grade S2 bits.

• 1/4": M4 | M5 | M6
• 3/8": M8 | M10 | M12
• 1/2": M14 | M16

A specialised spline socket with particular application for rear caliper bolts on Audi A3 | VW Golf | Passat, and upper ball joints on VW LT | Touran | T4 Transporter.

• M14 Spline socket
• 60mm overall length
• 1/2" Sq Drv
• Impact grade construction

• M14 Spline impact socket
• 40mm length
• 1/2" Sq Drv

• M14 Spline impact socket
• 75mm length
• 1/2" Sq Drv

• M16 Spline impact socket
• 40mm length
• 1/2" Sq Drv

• M16 Spline impact socket
• 75mm length
• 1/2" Sq Drv

A specialised impact socket for servicing rear axle retaining screws on Audi / VW vehicles.

• M18 Spline
• 12 Point
• 3/4" Sq Drv
• 105mm long
• Impact grade

• M18 Spline impact socket
• 40mm length
• 1/2" Sq Drv

• M18 Spline impact socket
• 75mm length
• 1/2" Sq Drv

A specialised impact socket for servicing rear axle retaining screws on Audi / VW vehicles.

• M18 Spline impact socket
• 12 Point
• 1/2" Sq Drv
• 78mm long

This handy kit contains popular sizes of Spline impact sockets in two lengths, in Chrome Moly steel for greater strength.

These sockets are essential for vehicle maintenance. Especially VAG hubs, calipers on Golf / Sharan / Transporter, and rear calipers on Porsche Cayenne.

Packaged in a handy plastic case.

• M14 - 40 & 75mm long
• M16 - 40 & 75mm long
• M18 - 40 & 75mm long

• M4 | M5 | M6 | M8 | M10 | M12 | M14 | M16 | M18
• 190mm Universal extension (1/2" Sq Drv)

This ball end spline bit socket is commonly used for servicing the intake manifold fixings on 2.0L 4 Cyl TDI engines used on Audi A3 and VW Golf models (from 2013). The ball end design allows for better access in tight areas.

• M10 Spline | ball end
• 140mm OL
• 1/2" Sq Drv
• OEM Equiv: T10501

78 / 120mm socket bits for bolt in style front wheel bearings. Avoids removing drive shafts!

• Includes Audi A3 (13 on) | Tiguan (08 on) | Touran (06 on) etc
• M12 XZN | 1/2" Sq Drv
• Chrome moly steel

A specialised bit for removing the clamping bolt on Piezo type injectors used on PD diesel engines. This bit features a slim design due to the restricted access to the clamping bolt.

• M6 spline
• 3/8" Sq Drv
• 75mm overall length
• OEM Equiv: T10054