Fuel Tank Wrenches

Adjustable jaws make this fuel tank locking ring remover applicable to a range of vehicles. Simply loosen the lock nuts on the tool, and adjust so that the slots fits over the teeth in the plastic ring on the fuel tank.

• Adjustable 56 - 189mm range
• Civic | Corolla + many other models
• Use with 3/8" wrench

Used to remove the fuel level sensor lock ring on BMW & BMW Mini models from 1998 - 2011. This is necessary in order to access the fuel filter.

• Chassis codes: BMW E31, E34, E36, E38, E39, E46, E53, E60, E63, E64, E65, E70, E83, E85, E90, BMW Mini: R50, R52, R53, R55, R56, R57.
• 1/2" Sq Drv

A specialised tool for removing / installing the metal fuel tank lid on selected BMW vehicles with N63 engine, and the chassis listed below.

• Applications: BMW F01 | F02 |X3 chassis, with N63 engines.
• See instruction sheet for detailed vehicle fitment.
• OEM Equiv: 161190

A specialised tool to assist with removing / installing the fuel tank lid when servicing the fuel tank. This tool is applicable to a range of European vehicles including certain BMW, Mercedes models.

• 145mm OD
• Applications: BMW (E36 | E46), Mercedes (W203 | W211), Audi, Ford

A specialised fuel tank sender wrench for Kia vehicles. This wrench is also suitable for various BMW / Mercedes / Volvo diesel & petrol engines.

• Applications: Holden Astra J (2010>), Mercedes W204 | W212, BMW F01 | F02 | F10 | F12, Volvo T4 / T5 (2010>) | S40 | V40
• Hyundai | Kia: suits lock rings 31152 A9000 | 31152 J9000 | 31552 0W000.
• Approx dimensions - 180mm (bottom tab to top tab) | 80mm (PCD of two top tabs)
• 1/2" Sq Drv

This 3 leg tool is designed for removing / installing fuel tank sender moulding rings.

• 75 - 160mm range
• Use with a 24mm socket / wrench

A specialised fuel tank sender locking ring tool for Holden vehicles, as well as some SAAB vehicles.

Approximately 140mm high (from the base for the two angled arms to the top). Each arm approximately 75mm long.

• Astra-G (98-12) | Astra-H (04-12) & SAAB 9-3 (03-11)
• B207 | B284L | Z19DT | Z19DTH | Z19DTR
• 1/2" Sq Drv
• OEM Equiv: KM-797

A specialised wrench for removing / installing the plastic fuel tank retaining ring on a range of Honda vehicles. Loosen screws by hand to adjust tool to suit. Use a 1/2" Sq Drv tool to turn turn / tighten to 120Nm.

• For lock ring dia: 138mm | 155mm | 170mm
• Civic | Accord | CRV | CRZ

Mercedes fuel Sender unit pin wrench for removal and installation of the plastic fuel tank retaining cup.

This specialised wrench is part of the Endeavour Tools Fuel Tank Sender Wrench range. This wrench suits Mercedes W164 | W251 vehicles.

• 22 points
• Internal dia: 145mm | External dia: 190mm
• 1/2" Sq Drv (24mm hex drive)

Specialised fuel wrench socket for removing the fluid reservoir on the condenser on Toyota vehicles.

• 17mm hex
• 41mm overall length

Helps install / remove Toyota (77144-04010) plastic fuel tank lock rings.

• Applications: Corolla 4 Cyl 1.8 & 2.4L (04-14) | Land Cruiser 8 Cyl 5.7L (08-14) | Tacoma 4 Cyl 1.8 & 2.4L (04-14) | Yaris (08)
• 1/2" Sq Drv

A universal tool for removing / installing fuel gauge sender collars.

• Adjustable to suit most collars from 89mm - 170mm.
• Lock in place and turn with 19mm wrench / socket.

A universal kit for removing the retaining ring on fuel tank senders. Select either two jaws, or three jaws with a size range from 75 - 170mm.

An essential, time saving tool.

• Two jaw / three jaw
• Size range: 75 - 160mm | 80 - 122mm | 110 - 170mm

A specialised wrench for removing / installing the sealing ring for the fuel tank sender flange on selected Audi / VW vehicles.

• 120mm ID | 1/2" Sq Drv
• Applications: Audi 100 2.8L V6 (92-94) | A4 (02-08) | A6 (92-98) | S4 (02-08), Porsche Cayenne (03-14), VW Touareg
• OEM Equiv: T10202 (Replaces 3087)

A specialised wrench to install / remove the fuel gauge sending unit on most Audi / VW and Porsche Boxster 911 vehicles.

• 139mm diameter
• 1/2" Sq Drv

A specialised wrench for the installation / removal of the fuel tank module retaining ring on a range of Volvo passenger vehicles.

• Applications: S60 | S80 (-06) | XC90 (00-08) | V70 (00-08) | V70XC (01-) | XC70 (-07)
• Engine codes: B5204T4 | B5204T5 | B5234T3 B5234T7 | B5244S | B5244S2 | B5244T3 | B5254T2 | B6284T | B6294S | B6294S2 | B6294T | B6304S3 | B8444S | D5244T

A specialised wrench removing / installing fuel tank lid on Volvos.

• P2 platform vehicles including S80 (P23), S60 (P24), V70 (P26E) | XC70 (P26L) | XC90 (P28)
• OEM Equiv: 999 5720
• 1/2" Sq Drv

A specialised tool for removing / installing the retaining ring on fuel tanks on a range of Volvo vehicles.

• C30 | C70 (06-) | s40 (04-) | S60 (11-) | S80 (07-) | V40 (13-) | V50 | V60 | V70 (08-) | XC60 | XC70 (08-)
• OEM Equiv: 9997093