Pressure Brake Bleeders

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.

Single handed brake bleeding. Powered by the vehicle's own battery. No shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.
• Suitable for low viscosity brake fluids.
• Supplied with European adaptor.

Single handed brake bleeding. Powered by the vehicle's own battery. No shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.

Single handed brake bleeding. Powered by the vehicle's own battery. No shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.
• Suitable for low viscosity brake fluids.
• Supplied with European adaptor.

This brake bleeder adaptor has been designed to allow pressure brake bleeding on the Ford Ranger from 2012 onwards. This cap screws directly onto the master brake cylinder.

• Suits Ford Ranger (2012 onwards) vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 41mm diameter

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Colorado / Isuzu D-Max vehicles.

• Suits Colorado / Isuzu D-Max vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 54mm diameter

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Honda vehicles.

• Suits Honda vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 55mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Honda vehicles.

• Suits Honda vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 74mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Mitsubishi vehicles.

• Suits Mitsubishi vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 34 mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Mitsubishi vehicles.

• Suits Mitsubishi vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 35.5mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Toyota vehicles.

• Suits Toyota vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 23mm dia

A specialised brake bleeder adaptor, for pressure style brake bleeders. Suits a range of Toyota / Lexus vehicles. Part of the Endeavour Range of brake bleeder tools.

• Suits Toyota / Lexus vehicles.
• Nitto style connector fitting
• 43mm dia

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Ford Fiesta vehicles.

• Suits Ford Fiesta MK6 (08-16) vehicles.
• Nitto style connector fitting
• 35mm dia
• 3 lug design

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Tesla S / X vehicles.

• Applications: Holden Colorado (2017-) | Ford Transit (2019-) | Mazda 3 (2015-) | Tesla S (2012-) / X (2015-)
• Nitto style connector fitting
• 36mm dia
• 3 Lug bayonet fitting

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a range of Chrysler / GM vehicles which are fitted with a tandem reservoir.

• Suits a range of Chrysler / GM vehicles fitted with a tandem reservoir.
• Nitto style connector fitting
• 4-3/4" x 7" (125 x 185mm)

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system. This adaptor suits a number of Nissan commercial vehicles.

• Suits a range of Nissan commercial vehicles and Holden Calais VF (LFX)
• Nitto style connector fitting
• 36mm / 49.5mm (1-5/16") OD reservoirs
• 3 Lug bayonet fitting

This master cylinder adaptor suits Hyundai / Kia vehicles, as well as some Nissan vehicles, and the Tesla 3. For use with the ETWH505HA pressure style brake bleeder.

• Applications: Tesla 3 (2017-) | Hyundai i30 (2012-), Kona (17-23) | Kia Picanto (2011-), Rio (2011-) | Nissan Qashqai (07-10)
• Nitto style connector fitting
• 50.5mm ID
• 3 lug design

A specialised brake cylinder adaptor for use with pressure style brake bleeders. Part of the Endeavour range of brake bleeding tools.

A specialised brake cylinder adaptor for use with pressure style brake bleeders. Part of the Endeavour range of brake bleeding tools.

A specialised brake cylinder adaptor for use with pressure style brake bleeders. Part of the Endeavour range of brake bleeding tools.

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a range of Nissan vehicles.

• Suits a range of Nissan vehicles.
• Nitto style connector fitting
• 1-3/8" (34.5mm) ID reservoirs
• 2 Lug bayonet fitting

A specialised brake cylinder adaptor for use with pressure style brake bleeders. Part of the Endeavour range of brake bleeding tools.

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system. This adaptor suits Ford / Mazda vehicles.

This adaptor has a double o-ring design that seals to a depth of 14mm.

• Suits Ford / Mazda vehicles.
• Nitto style connector fitting
• Right angle connector
• Inner cap 36mm dia | Inner point to point 50mm (excluding lugs)
• 3 lug design

A professional adaptor kit for use with our ETWH505H pressure blake bleeder kit. This adaptor kit contains a wide range of vehicle specific adaptors, as well as universal style adaptors.

• Nitto style connectors
• 12 pce kit

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Nissan vehicles.

• Suits Nissan vehicles.
• Nitto style connector fitting
• Zinc alloy construction
• 35mm dia

Replenishment bottle designed for use with the Endeavour 12V brake bleeders. This bottle fits in the space above the top of the unit.

• Capacity: 5.6L

A very convenient tool to use in conjunction with the ETWH505HA pressure brake bleeder. Use the wrench to open the nipple. Used brake fluid then flows through the hose (into any convenient disposal bottle). The one way valve prevents air from reentering the system.

• 10mm (6 point) brake bleeder wrench
• Silicone hose, with one way valve

This brake bleeder pressure adaptor suits Holden & Ford AU oval master cylinder reservoirs. For use on tandem reservoirs.

• A popular adaptor for Ford Falcon / Commodore models
• Nitto style connector fitting
• 2-9/16" x 4-5/8" (100 x 128mm)

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a range of Honda Accord vehicles.

• Suits a range of Honda Accord vehicles.
• Nitto style connector fitting
• 2-1/4" (56mm) ID reservoirs
• 2 Lug bayonet fitting

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Mitsubishi Delica vehicles.

• Suits Mitsubishi Delica vehicles.
• Nitto style connector fitting
• 26mm dia
• 2 lug design

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a number of Chrysler (Jeep) / Holden vehicles.

• Suits a range of Chrysler / Holden vehicles.
• Nitto style connector fitting
• Equivalent to ATE adaptor #22
• 43.5mm (11/16") OD
• 3 Lug bayonet fitting

A master cylinder adaptor for a wide range of European (and BYD) vehicles. Designed for use with the Endeavour range of pressure brake bleeders.

• Applications: Alfa | Aston Martin | Audi | Bentley | BMW | BYD | Citroen | Fiat | Jaguar | Land Rover | Mercedes | Peugeot | Porsche | Renault | Tesla | Volvo | VW
• Nitto style connector fitting
• 45.2mm dia
• 3.0mm Female ISO "V" thread

A block off adadptor designed to be used in conjunction with the ETWH500BC-01 master cylinder adaptor.

• Suits a range of Chrysler / Holden vehicles.
• Nitto style connector fitting
• Block off adaptor
• 43.5mm OD block off cap
• 3 Lug bayonet fitting

An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits a range of Honda vehicles.

• Suits a range of Honda vehicles.
• Nitto style connector fitting
• 2-15/16" (74mm) ID reservoirs
• 2 Lug bayonet fitting

A high quality kit of master cylinder adaptors that are compatible with all standard pressure brake bleeders (provided they use Nitto style connectors).

These adaptors are made from metal, and feature a design where the inner seal expands outwards to provide a better seal.

Professional one person brake and clutch bleeding. Simply connect the adaptor to the master cylinder, fill the container with brake fluid, and pump. No external power source is required.

• 2.8 litre capacity
• Supplied with 44mm adaptor (ETWH500BC-06) that suits many European (and BYD) vehicles
• Other adaptors available separately

A master cylinder adaptor for universal use for vehicles with a round reservoir. Designed for use with pressure brake bleeders.

• Suits round reservoirs
• Nitto style connector fitting
• 2" - 3-3/8" (50-85mm)

A master cylinder adaptor for universal use for vehicles with a round reservoir. Designed for use with pressure brake bleeders.

• Suits round reservoirs
• Nitto style connector fitting
• 1-3/16" - 2-3/16" (30 - 55mm)

This brake bleeder adaptor is designed for use with our pressure brake bleeder (ETWH505HA). With adjustable wings, and a conical rubber plug, this brake bleeder is designed to fit round master cylinders with a 28mm - 70mm diameter.

• Suits round cylinders with 28 - 70mm diameter
• Holds pressure up to 3.5 bar / 50 PSI
• Adjustable wings to fit various brake reservoir filler neck sizes
• 90 degree rotating coupling
• 28 - 70mm dia