Panel Tools

Ensure a perfect welded butt joint. Holds panels edge to edge, with almost no gap. Level adjustment (0-3mm) allows flat alignment on top or bottom surface of panels. Set contains four clamps.

Introducing a new range of rechargeable soldering irons for more aggressive soldering needs. Featuring 80W soldering power - a 50% step up over our existing range. Extra large 2,400mAh Li-Ion battery allowing for extended use. Fast start up, and fast cooldown for more efficient / safer operation. Charging time 2.5 - 3 hours.

• 150W Hot staple tip
• 60W Plastic welding tip
• 60W Plastic welding tip with guide pipe
• Assorted staples / plastic rods
• 650 deg C max temperature
• Battery power indicator
• LED lights for illumination
• 17 tips available separately

Replacement chisel welding tip for the ETPRO-PS kit.

Replacement dual welding tip for the ETPRO-PS kit.

Plastic welders were designed to repair small to medium damage to components that would otherwise need to be replaced.

Now with a rechargeable lithium battery. Up to 150 staples in a single charge!

• For welding / repairing plastic parts, such as vehicle bumpers, cracks, broken fixtures etc
• Kit includes 9mm | 12mm welding tips, steel mesh (10cm x 6cm), ABS | PE | PP | PS welding rods

• FULLY PORTABLE
• REPAIR SMALL PLASTIC COMPONENTS

Replacement welding tip for the ETPRO-PS kit.

A convenient tool for expanding tailpipes. Simply place inside the tailpipe and turn the inside hex nut to expand the diameter of the tube.

• 30 - 44mm diameter
• Extra long hex rod

Abrasive holder with polished wooden handle. Retaining clips hold abrasive paper firmly.

• Surface size: 70 x 230mm

Includes hand pump with air control valve. The air bags are gentle on glass, frames and paintwork. Each bag is made from tough reinforced fabric.

A simple and effective tool for dent removal, or raising items like doors for easy fitment.

• Bag sizes: 57 x 190mm | 60 x 180mm | 160 x 160mm

Heavy duty suction dent puller with slide hammer. Manual vacuum pump for portable use.

• Supplied with 3 suction pads and 1 hook
• 2.5kg slide hammer

An extra long hex socket for N55 valve cover bolts. Also suits rear bumper screws on Mercedes C Class vehicles (W204) and selected Audi models. Designed for controlled screwing using torque values specified in the factory manual.

• Engine: N55
• Applications (rear bumper screw): Mercedes C-Class (W204), Audi: A3 (since 2004) | A4 (since 2001) | A6 (since 2005) | TT (since 2007)
• 10mm hex |120mm overall length
• 1/2" Sq Drv

Plastic rivets are commonly used on car carpets, seats and trims. This set includes a gun for applying the plastic rivets, along with 40 plastic rivets.

Replacement rivets are available separately.

• 5mm x 15.8mm (10 pce)
• 6.6mm x 17.2mm (10 pce)
• 5mm x 17.2mm (10 pce)
• 6.3mm x 25.2mm (10 pce)

Plastic rivets are commonly used on car carpets, seats and trims. This set includes a right angle gun for applying the plastic rivets, along with 40 plastic rivets.

Replacement rivets are available separately.

Quality alloy steel double ended blade cuts perfect holes in most materials, and is also ideal for quickly removing spot welds on body panels etc. The retractable pilot point avoids the need to drill a centre hole - simply centre punch the panel / place pilot point on the indent.

• Quality alloy steel double ended blades
• 3/8" Spotweld cutter
• 1/4" arbor for use with all 1/4" or larger variable speed drills
• 75mm overall length

Sturdy plastic construction with two suction pads, with individual lever operation. Ideal for heavy lifting applications.

• 70kg lift capacity

Pull out panel dents safely & easily. Swivel handle permits pulls with chain & pick. Lift lipped edge to release vacuum.

• 6" (150mm) diameter cup.