Very sharp probes suitable for piercing cable. Kit comes with two probes, one for 8-18 gauge wire, and the other for 20-28 gauge wire.
4mm banana jacks suit all standard multimeters / Power Probe units.
- Yellow - suits 8-18 gauge wire
- Green - suits 20-28 gauge wire
SKU | PPTK0003 |
Barcode # | 816724020381 |
Brand | Power Probe |
Product weight | 0.08kg |
Shipping weight | 0.23kg |
12 Months
Others also bought


Power Probe 5V Tip Adaptor
Connects to any Power Probe. Limits output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles. Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.


Glow Plug Adaptor | M10 x 1.25
A specialised glow plug adaptor for use with testing compression on Nissan ZD30 engines.
- Application: Nissan ZD30 engines
- M10 x 1.25 thread adaptor
- 21cm length


Power Probe Current Measuring Adaptor
Measures up to 20A (and as low as 1 milliamp). Displays current in realtime. Adaptors work with all Power Probe circuit testers!


Power Probe Pulse Width Modulation Adaptor
The PPPWM is an adapter that is plugged into Power Probe products with 4mm banana plugs (such as THE MAESTRO / PP4 / PP3 / PP3EZ etc).
The adapter can be set for the output 0-100% pulse width drive waveform by pressing the key. It is mainly used for automotive applications such as automotive fan circuit detection, to find the part of the circuit failure, in order to replace and repair.
Duty cycle adjustable 5% - 100%.
For 12V / 24V use. 10A max continuous output.

Master Radiator Pressure Test Kit
Our new updated radiator pressure test kit sets the new industry benchmark!
Faster, easier, and more comfortable to use, than existing kits.
Perform cooling system leak tests, vacuum type coolant refills, and leak tests on radiator caps.
- Updated adaptors (more coverage than older kits) - includes new Volvo Hybrids
- Updated pressure pump, coolant refill and adaptor design
- Faster refill speed - 91 ml / sec vs 37 ml
- Connectors are compatible with superceded adaptor kits
More from this category

Power Probe 20 Ft Extension Cable
The Power Probe PPTK0027 is a 20 foot extension cable designed for use with Power Probe 3 and 3EZ diagnostic tools. It extends the reach of your Power Probe, making it ideal for testing electrical circuits on larger vehicles and trailers. This high-quality cable ensures consistent power delivery and secure connections for accurate diagnostics.
- Original part # PN3049

Power Probe 20 Ft Extension Cable
The Power Probe PPTK0029 is a 20-foot extension cable designed for use with the Power Probe 4 and Maestro diagnostic tools. It extends the reach of your Power Probe, making it ideal for testing electrical circuits on larger vehicles and trailers. This high-quality cable ensures consistent power delivery and secure connections for accurate diagnostics.

Power Probe 3 Battery Clip Set
This clip set allows your Power Probe circuit tester to be powered from any 12V source. Suits all Power Probe 3 models only.
- Original part # PN3046


Power Probe 3" Probe Tip (2 Pack)
Replacement 3" probe tips, suitable for all Power Probe units. These are the original tips supplied with all Power Probe units. For a longer 6" tip, please refer to PPTK0043.
- With 4mm banana jack
- Original part # PN3015-BLK
- 2 pack


Power Probe 5V Tip Adaptor
Connects to any Power Probe. Limits output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles. Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

Power Probe Adaptor Set
This Power Probe kit contains two adaptors - a male / male and a female / female adaptor. The 4mm connectors are suitable to use with all standard multimeters.
- male / male adaptor
- female / female adaptor