An incredibly handy set of wheel nut sockets. These sockets are new half size sockets for chrome covered nuts which have become swollen / warped.

Inflated / warped chrome plated caps are a common problem, especially on some Ford vehicles. Standard sized wheel nut sockets will not fit, and a half sized variant is required.

The 19.5mm socket is designed for VW Amarok vehicles.

• Thin wall impact sockets (with protective sleeve)
• 18.5mm | 19.5mm diameter
• 6 point sockets
• 1/2" Sq Drv

The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

An incredibly handy set of wheel nut sockets. These sockets are new half size sockets for chrome covered nuts which have become swollen / warped.

Inflated / warped chrome plated caps are a common problem, especially on some Ford vehicles. Standard sized wheel nut sockets will not fit, and a half sized variant is required.

The 19.5mm socket is designed for VW Amarok vehicles.

• Thin wall impact sockets (with protective sleeve)
• 18.5mm | 19.5mm diameter
• 6 point sockets
• 1/2" Sq Drv

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

Single handed brake bleeding. Powered by the vehicle's own battery. No shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.

A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.

• Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
• Print function via PC printer
• Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

DC powered timing light for use on 12V petrol engines. High intensity prefocused flashes clearly pick up engine timing mark.

• Double check indicator tests for incorrect hook up or faulty Xenon tube
• Universal spark plug adaptor installs in seconds
• Replaceable Xenon flash tube

This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• CAT III 600V rating