A comprehensive adaptor kit for use with ATF transmission fillers. Please see the download link for a full list of adaptors supplied.

These adaptors are designed for use on automatic transmissions without a dipstick.

• Includes the latest adaptor for VAG DSG 7 speed.

Plastic rivets are commonly used on car carpets, seats and trims. This set includes a gun for applying the plastic rivets, along with 40 plastic rivets.

Replacement rivets are available separately.

• 5mm x 15.8mm (10 pce)
• 6.6mm x 17.2mm (10 pce)
• 5mm x 17.2mm (10 pce)
• 6.3mm x 25.2mm (10 pce)

A master kit of suspension strut top nut tools for a wide range of European applications.

• Special strut nut sockets to allow the strut nut to be loosened. Including specific strut nut tools for Mercedes / VW.
• Socket blades suit strut nuts with cross grooves from 3.5mm up.
• Hub strut clamp expanders (1/2" Sq Drv)
• For use with 16mm / 22mm spanners

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

Single handed brake bleeding. Powered by the vehicle's own battery. No shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.

A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.

• Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
• Print function via PC printer
• Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)

DC powered timing light for use on 12V petrol engines. High intensity prefocused flashes clearly pick up engine timing mark.

• Double check indicator tests for incorrect hook up or faulty Xenon tube
• Universal spark plug adaptor installs in seconds
• Replaceable Xenon flash tube

This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• CAT III 600V rating