This pen style tool tests the percentage of water in brake fluid, and tests all essential profiles for modern brake fluids. Please refer to the DOWNLOAD tab for a detailed instruction sheet.

• Colour coded LEDs show water level
• DOT 3 | DOT 4 | DOT 5.1
• Not suitable for silicone based DOT 5.0
• Battery included

These flare type injection wrenches are designed to access hard to reach diesel injectors. They have a long 125mm shank, with flexible heads, providing up to 220 degrees of movement.

These wrenches are made by hot forging, providing a far superior torque capacity to standard injection wrenches.

• Single hex | 3/8" Sq Drv
• Sizes: 12 x 110mm | 14 x 115mm | 16 x 125mm | 17 x 125mm | 18 x 125mm | 19 x 125mm

This 4 way indent crimper crimps pins, round barrel contacts and sockets. A built in locator ensures accurate positioning of the pin & socket before crimping.

An Essential tool for Caterpillar, Kenworth & Harley mechanics

• Application: AWG 26-20, RS232 D-Sub 35-465
• Full cycle ratchet ensures a high quality, consistent crimp
• Adjustable pin height locator

An essential tool for Harley & Caterpillar mechanics.

This tool crimps round barrel contacts, pins and sockets. A built in locator ensures accurate positioning on the pin and socket, for a perfect crimp.

Adjustable pin height locator.

• D-Sub Deutsch 4 way indent crimper
• 0.5-4mm2 | AWG 20-12

Widely used by Caterpillar, Harley, Kenworth etc. This kit contains 6 dies for common Deutsch terminals.

• K1: AWG 14/12 (DT / P)
• K2: AWG 10/12 (DT / P)
• K3: AWG 18/16/14 (DT / M)
• K4: AWG 20/18/16 (DT / M)
• K5: AWG 20/18 (DT / M)
• K6: AWG 16/14/12 (DT / P)

A specialised set of three disconnect tools to remove Deutsch terminals from connectors fitted to Caterpillar, Harley Davidson, Kenworth etc.

• 4, 8, 12, 14, 16, 20mm blade tools + Wedge Removal / Flat Tip screwdriver
• Stainless steel slotted tubes