Holding tool for crankshaft pulley bolts, to service fixings without losing crank position - flat handle for access to tight areas.
- Applications: Impreza 1800cc
- Engine code: EJ18
- 4 x 7mm dia pins | 75mm PCD
- Outside dia: 96mm
- Hole dia: 53.5mm
Engine Code(s)
EJ18
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Subaru | Impreza | GC | EJ18 | 1.8L | 1992 | 1997 |
| Subaru | Impreza | GF | EJ18 | 1.8L | 1992 | 2000 |
499977100
Engine Code(s)
EJ18
| Vehicle Make | Model | Series | Engine Code | Engine Size | Year Start | Year End |
| Subaru | Impreza | GC | EJ18 | 1.8L | 1992 | 1997 |
| Subaru | Impreza | GF | EJ18 | 1.8L | 1992 | 2000 |
| SKU | ET1151 |
| Barcode # | 9321280328761 |
| Brand | Automotive |
| Product weight | 1.0700kg |
| Shipping weight | 1.070000kg |
| Vehicle Make | Subaru |
12 Months
More from this category
Land Rover Injection Pump Release Screw
Forcing screws and bolt to remove the fuel injection pump. Use with 303-249-01 & 303-1049 (ET1013L).
- Application: Land Rover Defender (07MY)
Master Timing Kit
Master timing kit containing a wide range of pulley holding / pulling tools for popular Honda, Mazda, Hyundai, Subaru and Daewoo vehicles.
Subaru 2.5L | 3.6L Camshaft Sprocket Holder
Holds camshaft sprockets on 2005 and newer Subaru models with 2.5L Turbo and 3.6L 6 cylinder engines with variable gears.
Some 2.5L engines may require the ET1202 as well.
- Dimensions: 31.7mm * 28mm * 7mm
- Overall length: 475mm
Subaru Cam Sprocket Holding Tool
Suits Liberty 2.0L EJ22 engine & V7 & V8 EJ207 engines with intake AVCS. Intake cams only.
Allows for the removal of the AVCS intake cam sprockets without damaging the cam or the sprocket.
- 3 pin circle
- 104mm head diameter
- Overall length: 700mm
Subaru Cam Sprocket Tool
Wrench holds the pulley from rotating, then allows the central fixed screw (SOHC cam sprocket) to be extracted. ALSO suits Saab 9-2X linear SOHC engine (05-06) & Baja SOHC engine (04-06)
- Suits Legacy 2200cc engines
- Engine code: EJ22
Subaru Cam Sprocket Wrench
An essential wrench for holding the camshaft pulley when replacing / installing the timing belt. This wrench has two special internal curves for holding the pulley.
This special design will not round out the internal pulley spline.
- Application: Impreza WRX STI (08-)(exhaust cams only)
- OEM Equiv: 499977500