The Power Probe Temperature Kit is designed to give readings for ambient temperature and from the wireless Temperature Probe.

The Tempkit has a built-in temperature sensor in the base unit, plus a temperature sensor in the remote wireless Probe. This allows for multiple readings simultaneously.

One additional wireless Temperature Probe (TEMPPROBE) is available separately, for a second temperature reading.

• Measuring Range: -22°C to 70°C
• Wireless Transmitter Distance: 5m (16.5 Feet)
• Accuracy ±2.0°F(±2.0°C)
• Backlit LCD Display
• Requires 2x AA and 2x AAA Batteries (NOT INCLUDED)

Heavy vehicles require higher capacity smoke machines. The new SmokeMan HD delivers up to 120 PSI max pressure. Test more than just engines. Check for leaks on small water tanks, air tanks, braking systems etc...

• Both flow and pressure control
• Up to 120 PSI max pressure (compressed air required)
• Heavy vehicle adaptor set included
• Dual gauges - Test and System Pressure
• 12 month warranty

Forcing screws and bolt to remove the fuel injection pump. Use with 303-249-01 & 303-1049 (ET1013L).

• Application: Land Rover Defender (07MY)

Master timing kit containing a wide range of pulley holding / pulling tools for popular Honda, Mazda, Hyundai, Subaru and Daewoo vehicles.

Holds camshaft sprockets on 2005 and newer Subaru models with 2.5L Turbo and 3.6L 6 cylinder engines with variable gears.

Some 2.5L engines may require the ET1202 as well.

• Dimensions: 31.7mm * 28mm * 7mm
• Overall length: 475mm

Suits Liberty 2.0L EJ22 engine & V7 & V8 EJ207 engines with intake AVCS. Intake cams only.

Allows for the removal of the AVCS intake cam sprockets without damaging the cam or the sprocket.

• 3 pin circle
• 104mm head diameter
• Overall length: 700mm

Wrench holds the pulley from rotating, then allows the central fixed screw (SOHC cam sprocket) to be extracted. ALSO suits Saab 9-2X linear SOHC engine (05-06) & Baja SOHC engine (04-06)

• Suits Legacy 2200cc engines
• Engine code: EJ22

An essential wrench for holding the camshaft pulley when replacing / installing the timing belt. This wrench has two special internal curves for holding the pulley.

This special design will not round out the internal pulley spline.

• Application: Impreza WRX STI (08-)(exhaust cams only)
• OEM Equiv: 499977500